[ the name of the commodity ]  dreamlike humidifier

  [ specification parameter ]
1. product size: 11.2*11.2*12.5CM

2. material:ABS+PP (internal) + electronic component + spongy rod

3. package: color box
4. accessories: USB line +1 root extra absorbent cotton rod

5. capacity: 380mL

6.外箱资料约:59.5x47.8x41.8CM/60PCS (packing number) /19.5KGS (gross weight)

7. single product (containing color box) gross weight approximately: 0.325KGS

The volume of 8.1 cases (whole box): 0.12CBM

9. working voltage / power: 5V/3.5W

  [ commodity graphic ]

一.The product is equipped with dreamy projection lamp, which is comfortable and colorful.

二.The product formed fog with ultrasonic vibration principle, effectively increasing the humidity in the air.

三.The product is equipped with silicone pad at the bottom, shockproof and anti-skid, and the details are humanized.

1.This product is5V==Power supply can be connected to the computerUSBInterface or output5V ==The adapter. (product only matchUSBLine, unadaptable

2.Before using the product,Please open the lid first, take the cotton rod in the humidifier plastic pipe out and soak the whole cotton rod in water (be sure to pay attention to the bottom of the humidifier plastic pipe, the spring under the cotton rod can not be lost), then the cotton rod is installed in the pipe, the plastic pipe and the humidifier must be tightened and finally added in the water tank.95%The water (as far as possible to the position of the calibration line), then tighten the lid and finally connect the power supply.(Indicator light, press the switch to turn on the humidification function.

3.Humidifier function: first press the switch to open the long spray function.6Hour automatic power off. The second time to press the spray,12Hour automatic power off. Third press switch,Turn off the humidification function.

4.Lighting function use: first long press switch2Second bright light color, second long press switch2Second light fixed current color, third long press switch2Turn off the light in seconds.

5.If you do not use this product for a long time, please keep the water tank clean and remove the water swab.

6.Cleaning methods: please use the cotton swab with water to wipe gently, do not use corrosive liquid cleaning; water container with clean cotton cloth carefully wipe, the electronic part of the ban on water.

  [ warm hints of ]

1.6Children under the age of age should be used under the guardianship of adults.

2.Do not wash the electronic parts in water or under the faucet to avoid damaging the electronic components.

3.Please disconnect the power when water is injected, clean or not used.

4.Do not add impurity water or essential oil, so as not to block the atomizing chip.

5.Please do not disassemble and refit the product on its own.

6. light and shooting may cause a slight deviation between the color of the picture and the object.