Product Name:朵朵兔硅胶灯（Bunny Silicone Night Light）

[Specification parameters]

1. Material: ABS+silicone+electronic components

2. Product size approximately: 94 x 92 x 202mm

3. Packaging: Color box

4. Accessories: Type-C charging cable, instruction manual, certificate of conformity

5. Power parameter: 1W

6. Battery capacity: 1200mAH 18650 lithium battery

7. Working voltage/current: 5V/1000mA

8. Outer box information approximately: 51x51x44CM/50PCS (packing quantity)/16KGS (gross weight)

9. The gross weight of a single product is approximately 300g

10. The volume of a full box is approximately 0.11 CBM

Product features:

1. This product is a charging lamp that can be recharged and reused.

2. This product comes with seven colored lighting, which can be adjusted according to personal preferences.

3. This product is made of soft and cute materials, and can also be used as a decorative item.

Instructions for use:

Before using this product for the first time, please fully charge it. Charging voltage/current DC5V/1000mA. It can also be charged with an equal pressure power bank. It takes about 3 hours to fully charge (the charging time depends on the output current of the charger used). When charging, the red light flashes, and it stays on for a long time when fully charged. After being fully charged, the warm white light can be used for about 10 hours, and the colorful light can be used for about 11 hours.

2. Power switch instructions: Press the switch, the light will turn on (warm white color); Press the switch again and the light will turn off.

3. Timer function: Long press the power button, the warm yellow light flashes twice, and the 3-hour timer function is activated. If not needed, press the power button again to turn off the timer function.

4. Adjusting the lighting changes of the tapping product: When the power switch is turned on and the light is warm white, the first tapping will gradually change the color of the light in three seconds; The second slap, the color of the light stays at the color of the slap; The third tap, the light goes out; Fourth tap, warm white light, repeat in a loop.

When the light is extinguished by tapping, the product is still working and static current is generated. If not used for a long time, please use a switch to turn off the lights in order to reduce battery loss.

6. After fully charging, please cut off the power in a timely manner.