Micro tool gas welding, gas welding using high-pressure injection technology, gas in the supercharger after compression, under the action of huge pressure jet out violently. Using butane gas as fuel, it can be filled with the gas of general lighters for repeated use; It can produce high temperature flame, which can be used for camping ignition, electrical repair and dismantling of sheet elements. The flame is adjustable and butane gas is used. 

   According to the mechanical design of human hand, the switch can be used by pressing the thumb, which is convenient to use at any time. At the same time, it can also be placed on the bedside and table as a small decoration. 

   The selective switch can close the valve when it is not in use. It is safe and convenient. When it is practical, it can open the valve by rotating, and then press the ignition key to spray fire. The fire power can be directly controlled by rotating. It is very safe to close the valve when it is not in use. Moving the spring rotating valve at the fire spout can choose between open fire and direct fire. 

   Using new technology, single nozzle, direct flame and ordinary flame (open flame) can be switched (Note: ordinary flame can not be directly opened for ignition) with better effect and more convenient operation.

[Specification] base 69mm * width 87mm * height 144MM

Alloy

[weight] 212 g (without gas)

[internal pressure] 0.36 + / - 0.42mpa

[color] black

[packaging] original gift box packaging of Baicheng

[origin] China

[type of fire engine] welding type wind proof gas engine

[flame temperature] 1300 ℃

[burning time] about 50 minutes (can not be used continuously).

[gas capacity of the whole machine] 24ml (factory set safety capacity)

Inflation method:Before inflation, shake the air tank, then stand it upside down, with the inflation nozzle facing down, align it with the welding inflation hole and press it hard. After a while, release it and pull it out to complete inflation. After inflation, it can be used in about ten minutes.

 [flame range] (measured at room temperature of 22 ℃) the flame can be adjusted between 35mm and 10mm. The flame here refers to the dark blue flame area in the middle of the flame, and the large jet distance of the peripheral flame can reach about 200 mm

       [ignition mode] turn on the gas valve (control the flame size through the gas valve), and press the ignition switch to ignite (Note: the gas valve must be closed after use)

       [inflation capacity] 24ml (safety capacity)

       Special alloy nozzle and high-temperature ceramic sheath are used to produce high-temperature flame. It is used to dismantle slice elements. The flame is adjustable and self-locking switch can be used after pressing.

       Use butane gas. Small size, no power supply, electronic ignition, unique double locking function, sustainable fire spraying, very convenient to use.

       There is a big difference between this product and the windproof lighter. Few lighters can be used continuously for more than one minute, and the firepower is scattered. However, this product can be used continuously without damaging the welding nozzle, protected by high-temperature ceramic sheath, and the firepower and heat are highly concentrated.

       Using high pressure injection technology (the top of the fuselage is equipped with a supercharger), the gas is compressed in the supercharger and ejected violently under the action of huge pressure, so that the flame temperature reaches 1300 ℃. It can be used to process and weld small or thin metals or plastics with low melting point.

       Such as welding and cutting, repairing plastic products, repairing automobiles and motorcycles. It can also be used as a strong windproof lighter with adjustable firepower（ It's very suitable for people who like to do small jobs, such as baking dental mold, baking, outdoor barbecue, small household appliances, etc.)

★■Function introduction■★

       ★Special locking function, easy to use (the locking switch is located at the connection part between the metal head and the gas chamber), good combustion effect, and the flame is blue when fully burned.

       ★ It's a good helper for travel, exploration and camping,

       ★A must-have for field sports enthusiasts! It's more useful in the wild. You can get some non combustible wet firewood right away!

Zhejiang Baicheng cigarette set Co., Ltd

   [brand] Baicheng honest

   [product name] 505jet welding / spraying windproof lighter

   [material] alloy + plastic jacket

  [weight] about 212 g, no gas

   [internal pressure] 0.36 + / - 0.42mpa

   [color] as shown in the picture

   Packaging carton packaging of Baicheng original factory

   [origin] Wenzhou

   WeldingWind proof gas turbine

   Safety design design of rotary valve switch

   [flame temperature] about 1300 ℃

   [combustion time] the intermittent combustion time is about 50 minutes