Inflation and usage

Common sense of using gas lighter

(1) when filling, please make sure there is no visible fire nearby
（ 2) Standard butane gas of 3.6-4.2 atmospheres should be selected
（ 3) When filling gas, turn the lighter upside down, insert the cylinder nozzle into the air inlet at the bottom of the lighter, and press it moderately for 2-3 times (about 2 seconds each time);

(4) If the gas can not be filled, the residual gas in the machine can be vented first (use a small screwdriver to align with the air inlet and gently press it several times, and no obvious gas will come out)

Flame adjustment @ @ (1) after inflation, you must wait for about 1 minute, and then press ignition to start flame adjustment
（ 2) Select a suitable screwdriver and rotate the bottom adjusting rod of the lighter+& rdquo; The direction of rotation is to increase the flame& rdquo; The direction of rotation is to reduce the flame; Each rotation angle is generally no more than 60 DEG;, Otherwise, it is easy to cause no fire
（ 3) Flame height: about 3.0cm for open flame, about 2.0cm for windbreak and about 2.5cm for direct impact machine.
Flint replacement (applicable to flint rubbing machine)
(1) when the grinding wheel moves in the correct direction without obvious spark, please replace the flint
（ 2) First pull out the middle frame part, screw out the top screw with a screwdriver, take out the spring, pour out the remaining flint, put in the new spare flint, then put in the spring, tighten the screw, and insert the fuselage into the shell.

Special reminder: due to the limitation of the climate above 3000 meters above sea level on the combustion conditions, the ignition performance of windbreak and direct impact lighters will be greatly affected. At this time, it is recommended that you use open fire lighters, & nbsp;& nbsp; Common phenomenon and solution of metal lighter not working normally